Features - 2 Channel, Dual Trace - Sensitivity (Y1/Y2) : 5mV/div to 10V/div, 1-2-5 10 steps - High sensitivity up to 1mV/div - Auto Focus - Alter-mag, x1 and Mag trace can be display alternately, you can see two trace per channel - TV sync(TV-H, TV-V) function - Trigger Level Lock - Sweep rate : 0.1uS/div to 0.2s/div - Max. input : 300V(DC+ACpeak), via probe 400V(DC+ACpeak)

Block Diagram

Specification Specifications OS-9060A Vertical Axis Sensitivity 5mV/div to 5V/div 1-2-5 step, 10 steps±5%(range) (1mV/div to 1V/div at ×5 MAG±10%) Variable 2.5 : 1 Bandwidth(5mV/div) DC : 0 to 60MHz(-3dB) / AC:10Hz to 60MHz(-3dB) ×5MAG DC : 0 to 7MHz(-3dB) / AC:10Hz to 7MHz(-3dB) Overshot ≤ 5% Rise time Approximately 6ns Impedance 1MΩ±2%, 25 pF±3pF, via probe 10MΩ±5%, 25 pF±17pF Maximum input 300V (DC+AC peak), via probe 400V(DC+ACpeak) voltage Coupling AC-GND-DC Mode CH1, CH2, DUAL, ADD Invert CH2 only Horizontal System Sweep Mode X1, x10, x1, x10 alter Sweep Rate 0.1uS/div ~ 0.2S/div ±5%, 1-2-5, 20 steps Sweep Mag. 10nS/div to 20mS/div Alter-Mag. 4 trace Trace Separate ≤ 1.5div X-Y Mode Input CH1, X-axis and CH2, Y-axis Sensitivity Same as Y Impedance 1MΩ±2% , 25pF±3 pF X axis bandwidth DC-500kHz Phase error ≤ 30 (DC-50KHz) Trigger System Trigger mode AUTO, NORM, TV-V,TV-H Trigger Source INT, CH2, LINE, EXT Slope ＋, － Coupling system AC coupling Trigger Sensitivity Normal Auto 10Hz to 60Mhz(INT). 2div(EXT) 0.3V 20Hz to 60Mhz(INT). 2div(EXT) 0.3V TV Sync Int. : 1div / Ext : 1Vp-p Z axis Input impedance 33kΩ Maximum input voltage 30V (DC+AC peak), MAX AC ≤1KHz Band width DC to 1MHz Input Voltage ±5V (lower level to intent) Calibration Frequency 1Khz ±2% Voltage 0.5V(±2%) Power supply Power Supply AC 220V±10% / 50hz±5% Power Consumtion Approx. 35VA NET .Weight Approx. 7.2Kg Dimension(W×H×D) 321×132×376mm